Hydraulically_operated_ALS

Hydraulically Operated Automatic Centralised Lubrication Systems

Panther Pump

The pump is mounted on a grease reservoir along with control module, vent valve assembly and follower plate. This pump is available to suite reservoir capacity of 27 , 50 and 180kg. All hoses required for the pump station assembly include vent line hose and grease refill hose. Level indicator rod is provided for monitoring the grease level in the reservoir.

Technical Specifications :

PUMP OPERATING RATIO	10:1
MAX. GREASE OUTPUT PRESSURE	480 bar
MAX. HYDRAULIC FLUID INPUT PRESSURE	41 bar
MAX. HYDRAULIC FLUID INPUT VOLUME	11.7 lpm
HYDRAULIC FLUID CONSUMPTION RATE	0.195 ltr per cycle
MAX. FLUID TEMPERATURE	121° C
OUTPUT PER CYCLE	0.6 in3/ cycletd
MAX. FLOW RATE	499 gms/min 60 cyl.
STROKE	3 in. (76.2 mm)
HYDRAULIC INLET	3/4” npt
HYDRAULIC OUTLET	3/4” npt
LUBRICANT OUTLET	1/2” npt

Hydraulic Control Module

Control module is installed on the grease reservoir and consists of Solenoid Valve, Pressure Regulating Valve & Flow Control Valve. It puts the regulated hydraulic pressure gauge and flow and pressure controls in one place for total hydraulic output control.

The Hydraulic Control Module groups all hydraulic fluid system controls in one place for convenient and efficient set-up and trouble shooting

Pressure Gauge

Pressure Gauge reports the regulated hydraulic pressure being supplied to the motor for efficient set up

Three-Way Solenoid Valve

Three-Way Solenoid Valve is continuous duty rated and has hardened precision cage and spool for long life

Injectors :

FM-01 Injectors (for feed lines)

Technical Specifications :

MIN. OPERATING PRESSURE	128 bar
MAX. OPERATING PRESSURE	241 bar
OUTPUT VOLUME/ CYCLE	0.131 cc. - 1.31 cc.
RESET PRESSURE/ VENT PRESSURE	41 bar

FM-10 Injectors (for bucket link points)

Technical Specifications :

MIN. OPERATING PRESSURE	69 bar
MAX. OPERATING PRESSURE	241 bar
OUTPUT VOLUME/ CYCLE	0.82 cc.- 8.2 cc.
RESET PRESSURE/ VENT PRESSURE	41 bar

Vent Valve Assembly :

Vents/ relieves the inbuilt system pressure back into the grease reservoir.

Lubrication Controller (LC-02):

Features:-

Compact timer mounts easily in operator’s cabin

Simple timing set up

Dual monitoring function: PSI / Timer mode

Display indicates pump on, pause time, alarm (fault indicators) error code

24 VDC power voltage

Indicator lights for alarm, power on, pump mode, timer mode

Pressure Switch :

Pressure Setting: 75-175 bar

Tubing and Fittings :

All Tubing and Fittings are carbon steel compression type, which are as per DIN Standards 2353

Hoses :

Hoses considered are high pressure - reputed make for main line and feed Lines